MYLEX CORPORATION

DAC960SU, DAC 960SUI

Card Type               Hard drive controller card
Maximum Onboard Memory  Unidentified
Hard Drives supported   Up to 15 SCSI devices
Floppy drives supported None

[Image]

[Image]

                                CONNECTIONS

        Function          Location           Function          Location

  Unidentified               CN1       AEMI (Array                J5
  connector                            Enclosure Management
                                       Interface) port

  Unidentified               CN2       FAST/WIDE Ultra-SCSI       J8
  connector                            connector drive
                                       channel 0

  Unidentified               CN3       FAST/WIDE Ultra-SCSI       J9
  connector                            connector drive
                                       channel 1

  Edge connector             CN4       Power connector            J10
  (connects to P1)

  Fault indication,          J1        FAST/WIDE SCSI             J11
  drive channel 0                      connector host
                                       channel 0

  Fault indication,          J2        Power connector            J12
  drive channel 1

  Serial port                J3        Edge connector             P1
                                       (connects to CN4)

  Reserved (do not use)      J4

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   Factory configured - do not alter         JP6/E          Open

  »   Serial port protocol SLP1                 JP6/F          Open

      Serial port protocol VT100                JP6/F         Closed

  »   Factory configured - do not alter         JP6/G         Closed

  »   Factory configured - do not alter         JP6/H         Closed

  »   Termination disk channel 0 enabled       JP13/A         Closed

      Termination disk channel 0 disabled      JP13/A          Open

  »   Termination disk channel 1 enabled       JP13/B         Closed

      Termination disk channel 1 disabled      JP13/B          Open

  »   Termination host channel 0 enabled       JP13/C         Closed

      Termination host channel 0 disabled      JP13/C          Open

  »   Factory configured - do not alter        JP13/D          Open

  »   Factory configured - do not alter        JP13/E          Open

                             SCSI ID SELECTION

  SCSI ID       JP6/A          JP6/B           JP6/C            JP6/D

     0          Open            Open            Open            Open

     1         Closed           Open            Open            Open

     2          Open           Closed           Open            Open

     3         Closed          Closed           Open            Open

     4          Open            Open           Closed           Open

     5         Closed           Open           Closed           Open

     6          Open           Closed          Closed           Open

     7         Closed          Closed          Closed           Open

     8          Open            Open            Open           Closed

     9         Closed           Open            Open           Closed

    10          Open           Closed           Open           Closed

    11         Closed          Closed           Open           Closed

    12          Open            Open           Closed          Closed

    13         Closed           Open           Closed          Closed

    14          Open           Closed          Closed          Closed

    15         Closed          Closed          Closed          Closed

                DRAM CONFIGURATION

  Note: The DRAM configuration is unidentified.

[Image]

                       MISCELLANEOUS TECHNICAL NOTES

  The functions of front control panel switches of this housing are
  unidentified.

  Card configuration for the DAC9600SU and DAC9600SUI is identical except
  for the DAC9600SUI comes with the cards contained in a 5.25 inch full
  height drive housing.